Adhesive: 888.466.GLUE
Equipment: 888.357.9317
 
The PSP has one scanner input and capable of firing two 24VDC solenoids. For simple on/off applications only.

The PSP is a simple, two-dial control: one dial determines both glue pattern lengths and one dial determines the skip distance. The control features a mini-jumper which enables the user to select either a MOMENTARY (control will complete a gluing cycle after a momentary signal from the scanner or limit switch) or CONTINUOUS (gluing cycle will be interrupted if product falls off the limit switch or scanner) mode of operation.

Time duration of the pattern length and skip distance may also be selected by means of mini-jumpers. Three ranges standard (optional fourth): 0-0.2 seconds; 0-1.0 seconds; and 0-5.0 seconds.
Unit of Measure

Specifications

N/A PSP, Pattern-Skip-Pattern system control

Additional Information

N/A The PSP is a simple, two-dial control: one dial determines both glue pattern lengths and one dial determines the skip distance. The control features a mini-jumper which enables the user to select either a MOMENTARY (control will complete a gluing cycle after a momentary signal from the scanner or limit switch) or CONTINUOUS (gluing cycle will be interrupted if product falls off the limit switch or scanner) mode of operation.

Time duration of the pattern length and skip distance may also be selected by means of mini-jumpers. Three ranges standard (optional fourth): 0-0.2 seconds; 0-1.0 seconds; and 0-5.0 seconds.
^