Adhesive: 888.466.GLUE
Equipment: 888.357.9317
 
  • Graco Melters Icon

    Select an InvisiPac™ HM25 Tank-Free™ Hot Melt Delivery Stsrens vased upon channel and power input requirements.

    Graco InvisiPac HM25 Overview
    The HM25 is a melt-on-demand system allowing users faster start up times, clog and char free dispensing along with the ability to use lower cost bulk hot melt. Using an integrated vacuum system to bring hot melt to an in-line melter, unlike traditional tanks that need to bring the entire hot melt to temperature and remain melted for long periods of time.

    Graco Invisipac HM50 Overview
    The HM50 is the ultimate in bulk hot melt dispensing. With a 50lb per hour melt rate, the HM50 can keep up with even the most demanding applications. The invisipac hm50 offers cutting edge tools allowing users to calculate their "true adhesive costs" and virtually eliminates clogging due to char with its patented melt-on-demand system.  

  • Hose Assemblies

    Select InvisiPac HM25 Tank-Free Hot Melt Delivery System heated hoses based upon length. Available sizes range from 5ft to 25ft.

    Graco InvisiPac Standard Hot Melt Hose Overview
    The Graco InvisiPac heated hot melt hoses come standard with a tough, gray braided scuff guard and in a wide range of lengths to fit any environment. They run at a maximum of 400 Degrees Fahrenheit and at a top psi of 1500.

  • Nozzles Icon 2

    Nozzles

    (28)

    Select InvisiPac GS35 Plug-Free Adhesive Applicator nozzle(s) as required for the application.

    InvisiPac Nozzles Overview
    The Graco InvisiPac straight angle and right angle nozzles come in a wide range of orifice sizes to help regulate the exact amount of hot melt being dispensed. These nozzles work seamlessly with both the InvisiPac HM25 and HM50 hot melt systems. InvisiPac nozzles are extremely high quality and will out perform and outlast the other leading competitors nozzles with a more accurate bead, line and greater life expectancy.  

  • System Accessories Icon 3

    Select InvisiPac HM25 Tank-Free Hot Melt Delivery System accessories and kits as required for the application.

  • Spare replacement Icon 3

    Select InvisiPac HM25 Tank-Free Hot Melt Delivery System spare and repair parts as required for the application.

  • applicators icon

    Select InvisiPac GS35 Plug-Free™ Adhesive Applicator(s) based on module count, center-line spacing, solenoid requirements and electrical interface.

  • Applicator Spare Parts icon

    Select InvisiPac GS35 Plug-Free Adhesive Applicator spare and repair parts as required for the application.

  • Adapter Harnesses icon 3

    If running the InvisiPac HM25 Tank-Free Hot Melt Delivery System with a non-Graco applicator, select the appropriate adapter harness(es).

^